Application of Arduino-Based Systems as Monitoring Tools in Indoor Comfort Studies: A Bibliometric Analysis


environmental measurements

How to Cite

Daniel Trento, Ticiana Patel Weiss Trento, Eduardo Krüger. Application of Arduino-Based Systems as Monitoring Tools in Indoor Comfort Studies: A Bibliometric Analysis. Int. J. Archit. Eng. Technol. [Internet]. 2020 Apr. 19 [cited 2022 Aug. 12];7:1-12. Available from:


 Studies that require environmental measurements often struggle with the cost of monitoring equipment. Costs will increase as more variables are required. Thus, scientists have been increasingly relying on Arduino systems to overcome such a challenge. This paper aims to review the literature on the use of Arduino as a viable measurement tool in indoor comfort research. For this purpose, the results from three databases were compared: Web of Science, Scopus and ScienceDirect. Results from the Scopus search were then analyzed using VOSViewer according to three questions: (1) what is the state of the art and trends using Arduino; (2) how is Arduino being used in indoor environments; and (3) which are the main authors using the system and what are the most cited Arduino-related sources. The maps showed that the system is very versatile and offers the opportunity to strengthen multidisciplinary approaches.


Givoni, B. Man, climate and architecture, 2nd ed. Applied Science Publishers: London 1976.

Veitch JA, Steve AF, Kevin W. Judging the Scientific Quality of Applied Lighting Research. LEUKOS – Journal of Illuminating Engineering Society of North America 2019, 15 (2–3): 97–114.

Shunchang Y, Yikan L, Na W, Yingxiu Z, Spyros S, Pratap P. Low-cost, Arduino-based, portable device for measurement of methane composition in biogas. Renewable Energy 2019, 138: p. 224-229.

Grassini S, Corbellini S, Parvis M, Angelini E, Zucchi F. A simple Arduino-based EIS system for in situ corrosion monitoring of metallic works of art. Measurement 2018, 114: p. 508-514.

Laskar MR, Bhattacharjee R, Giri MS, Bhattacharya P. Weather Forecasting Using Arduino Based Cube-Sat. Procedia Computer Science 2016, 89: p. 320-323.

Camprodon G, González Ó, Barberán V, Pérez M, Smári V, de Heras MÁ, Bizzotto A. Smart Citizen Kit and Station: An open environmental monitoring system for citizen participation and scientific experimentation. HardwareX 2019, 6:e00070.

Bower I, Tucker R, Enticott PG. Impact of Built Environment Design on Emotion Measured via Neurophysiological Correlates and Subjective Indicators: A Systematic Review. Journal of Environmental Psychology 2019, 66: 101344.

Houser KW. ‘What?’, ‘Why?’, And ‘How?’: An Argument for Employing Physiological Techniques in Research about Visual Response to Light. Journal of IES 2019, 15 (1): 1–2.

Arduino, S. A.. Arduino. (accessed 15 January 2020).

Hughes JM. Arduino: A technical reference. https://www. ch01.html. (accessed 02 December 2019).

Warren JD, Adams J, Molle H. Arduino Robotics, 1st ed. Technology in action: 2011.

Karami M, McMorrow GV, Wang L. Continuous monitoring of indoor environmental quality using an Arduino-based data acquisition system. Journal of Building Engineering 2018, 19, 412-419.

Ali AS, Zanzinger Z, Debose D, Stephens B. Open Source Building Science Sensors (OSBSS): A low-cost Arduinobased platform for long-term indoor environmental data collection. Building and Environment 2016, 100, 114-126.

Natephra W, Motamedi A. BIM-based live sensor data visualization using virtual reality for monitoring indoor conditions. In: 24th Annual Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2019).

Ranjbar-Sahraei B, Negenborn RR. Research positioning & trend Identification – a data-analytics toolbox;

Arduino D. ORCID. (accessed March 27, 2020).

Arduino M. ORCID. (accessed March 27, 2020).

López-Vargas A, Fuentes M, Vivar M. IoT Application for Real-Time Monitoring of Solar Home Systems Based on Arduino™ With 3G Connectivity. IEEE Sens J 2019, 19 (2), pp. 679-691.

Alam M, Khan SA, Khairulalam M, Syed A, Rajkumar R, Azam TB. Industrial level analysis of air quality and sound limits monitoring in Bangladesh using real time control system. In: 30th International Conference on Vibroengineering. Phuket, 2017.

Allotta B, Pugi L, Massai T, Boni E, Guidi F, Montagni M. Design and calibration of an innovative ultrasonic, arduino based anemometer. In: Conference Proceedings – 2017 17th IEEE International Conference on Environment and Electrical Engineering and 2017 1st IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2017. Milan, 2017.

Karim S, Que BD, Que JE, Reyes LP, Gan Lim LA, Bandala AA, Vicerra RRP, Dadios EP. Design, fabrication, and testing of a semi-autonomous wheelchair. In: 9th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, HNICEM 2017. Manila, 2017.

Sendra S, Lloret J, Romero P, Parra L. Low-Cost System for Travel Aid and Obstacles Detection for the Visually Impaired People. In: 2nd International Conference on Healthcare Science and Engineering, Healthcare 2018. Guilin, 2018.

Scarpa M, Ravagnin R, Schibuola L, Tambani C. Development and testing of a platform aimed at pervasive monitoring of indoor environment and building energy. Energy Procedia 2017, 126, 282–288.

Sung W-T, Shih J-A. Construction of Indoor Thermal Comfort Environmental Monitoring System Based on the IoT Architecture. J Sens, 2019, Article ID 2639787.

Cesario E, Grifoni RC, Leuzzi A, Paciotti D. Light design in historical buildings: Parameters and prototypes. Comparison of façade behavior: Metal meshes vs. high-tenacity polymer composite meshes. In: 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC). Florence, 2016, pp. 1-5.

Gozuoglu A, Ozgonenel O, Karagol S. Fuzzy Logic Based Low Cost Smart Home Application. In: 2019 11th International Conference on Electrical and Electronics Engineering (ELECO). Bursa, 2019, pp. 64-68.

Tarapiah S, Aziz K, Atalla S, Ismail SH. Smart Real-Time Healthcare Monitoring and TrackingSystem using GSM/GPS Technologies. Int J Comput App 2016, 142, 19-26.

Sheet SSM, Mohammed ZG, Khaleel KN, Abbas AA. Smart Infant Incubator Based On Mega Microcontroller. In: 2nd International Conference on Engineering Technology and their Applications 2019-IICET2019. Alnajaf, 2019.

World Health Organization. eHealth. ehealth/about/en/. (accessed March 29, 2020).

Smith JP, Li X. AirSniffer: A smartphone-based sensor system for body area climate and air quality monitoring. In: 2016 10th International Symposium on Medical Information and Communication Technology (ISMICT). Worcester, 2016.

Abraham S, Li X. Design of A Low-Cost Wireless Indoor Air Quality Sensor Network System. International Journal of Wireless Information Networks: 2016, 23, pp. 57-65.

Corbellini S, Parvis M. Wireless sensor network architecture for remote non-invasive museum monitoring. In: 2016 IEEE International Symposium on Systems Engineering (ISSE). Edinburgh. 2016.

Angelini E, Posada CEA, di Francia E, Grassini S, Ianucci L, Lombardo L, Parvis M. Indoor and outdoor atmospheric corrosion monitoring of cultural heritage assets;

Grassini S, Angelini E, Ahmed E, Corbellini S, Lombardo L, Parvis M. Cloud infrastructure for museum environmental monitoring. In: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). Turin, 2017.

Sunehra D, Sandu S. Home environment monitoring and lighting control using cloud mqtt dashboard. International Journal of Scientific & Technology Research 2020, 9(2), 3539-3545.

Sunehra D, Nikhila J. Web based Environmental Monitoring System using Raspberry Pi. In: 2017 International Conference on Current Trends in Computer, Electrical, Electronics and Communication (CTCEEC), Mysore, 2017, pp 1074-1080.

Sung W-T, Shih J-A. Indoor thermal comfort environment monitoring system based on architecture of IoT. In: 2018 International Symposium on Computer, Consumer and Control (IS3C), Taichung, Taiwan, 2018, pp. 165-168.

Sung W-T, Hsiao S-J, Shih J-A. Construction of Indoor Thermal Comfort Environmental Monitoring System Based on the IoT Architecture. J Sens 2019, 2019, Article ID 2639787.

Ali AS, Fazli T, Huan JCP, Debose D, Dong B, Stephens B. Open Source Building Science Sensors (OSBSS): An open source sensor network for indoor environmental data collection. In: Proceedings – Healthy Buildings 2015 America: Innovation in a Time of Energy Uncertainty and Climate Adaptation 2015, pp. 138-141.

Fitriawan H, Mausa D, Arifin AS, Trisanto A. Realization of zigbee wireless sensor networks for temperature and humidity monitoring. In: International Conference on Electrical Engineering 2015. Pp.102-107.

Fitriawan H, Susanto M, Arifin AS, Mausa D, Trisanto A. ZigBee based wireless sensor networks and performance analysis in various environments. In: 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering 2017. Pp. 272-275.

Salamone F. Academia. FSalamone. (accessed January 16, 2020).

Danza L. ORCID. (accessed January 16, 2020).

Belussi L. ORCID. (accessed January 16, 2020).

Meroni I. Academia. ItaloMeroni. (accessed January 16, 2020).

Ghellere M. ORCID. (accessed January 16, 2020).

Ray PP. ORCID. (accessed January 16, 2020).

Zhang Y. SCOPUS: Author details. authid/detail.uri?authorId=57203829020&eid=2-s2.0- 33749045221. (accessed March 28, 2020).

Li X. SCOPUS: Author details. authid/detail.uri?authorId=8241588400&eid=2-s2.0- 85013391512. (accessed March 28, 2020).

Lee S. SCOPUS: Author details. authid/detail.uri?authorId=55878628900&eid=2-s2.0- 85020381431. (accessed March 28, 2020).

Wang ZL. SCOPUS: Author details. authid/detail.uri?authorId=56541992700&eid=2-s2.0- 84924743446. (accessed March 28, 2020).

University of Michigan. Research proposals – budget;

Yadav VP, Sinha A, Khosla Design and implementation of ultrasonic anemometer. In: 4th International Conference on Power, Control & Embedded Systems (ICPCES). Allahabad, 2017; pp. 1-6.

Güttler J, Georgoulas C, Linner T, Bock T. Evaluation of low cost capacitive ECG prototypes: A hardware/software approach. In: 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th International Conference on Research and Education in Mechatronics (REM). Compiegne, 2016; pp. 129-134.

Urrutia JWC, Miranda JRO. Recorder of climatic variables and river levels using open source software and hardware and mobile phone. In: IEEE 37th Central America and Panama Convention (CONCAPAN XXXVII). Managua, 2017; pp. 1-6.

Santos D; Ferreira JC. IoT Power Monitoring System for Smart Environments. Sustainability 2019, 11, no. 19: 5355.

Wu Y, Xu J, Zhang, J, Ruan X, Zhang J. Design of a miniature testing equipment. IOP Conference Series Earth and Environmental Science 2019, vol. 252.

Nowshin N, Mazumder P, Soikot MA, Probal M, Qadir MU. Designing and Implementation of Microcontroller Based Non- Invasive Health Monitoring System. In: International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST). Dhaka, 2019; pp. 134-139.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2020 International Journal of Architectural Engineering Technology