Numerical Study of Heat Transfer and Comfort Conditions in an Air-Cooled Ventilated Room with a Human Heat Source

Authors

  • Z. C. Briceño University of Sonora, CP 83000, Hermosillo, Sonora, Mexico
  • J. F. Hinojosa University of Sonora, CP 83000, Hermosillo, Sonora, Mexico

DOI:

https://doi.org/10.15377/2409-5826.2016.03.01.1

Keywords:

Turbulent heat transfer, ventilated room, discrete heat generation, radiative exchange.

Abstract

 A numerical study of the turbulent heat transfer in a two-dimensional rectangular air-cooled ventilated room with a human being as a discrete heat source was carried out in order to determine the best ventilation configuration. The results were obtained for a cavity of 2.5 m of height and 3.0 m of width. The right and left vertical walls of the cavity were kept at 35°C and 25°C respectively, whereas the remaining walls were adiabatic. Three cases for the air inlet and outlet locations were considered for the analysis. The air enters to the cavity at 15°C with speeds between 0.2 m/s and 2.0 m/s. The emissivity of the cavity walls was considered as 0, 0.5 and 1. The results indicate that the configuration (A) (inlet on the lower part of the right vertical wall and outlet on the upper part of the left vertical wall) offers the lowest average temperatures inside the room and the highest temperature distribution effectiveness.

Author Biographies

Z. C. Briceño, University of Sonora, CP 83000, Hermosillo, Sonora, Mexico

Department of Chemical Engineering and Metallurgy

J. F. Hinojosa, University of Sonora, CP 83000, Hermosillo, Sonora, Mexico

Department of Chemical Engineering and Metallurgy

References

Raji A and Hasnaoui M. Mixed convection heat transfer in a rectangular cavity ventilated and heated from the side. Numerical Heat Transfer Part A 1998; 33: 533-548. http://dx.doi.org/10.1080/10407789808913953

Raji A and Hasnaoui M. Mixed convection heat transfer in ventilated cavities with opposing and assisting flows. Engineering Computations 2000; 17: 556-572. http://dx.doi.org/10.1108/02644400010339770

Raji A and Hasnaoui M. Combined mixed convection and radiation in ventilated cavities. Engineering Computations 2001; 18: 922-949. http://dx.doi.org/10.1108/EUM0000000006212

Singh S and Sharif MAR. Mixed convective cooling of a rectangular cavity with inlet and exit openings on differentially heated side walls. Numerical Heat Transfer Part A 2003; 44: 233-253. http://dx.doi.org/10.1080/716100509

Posner J. Measurement and prediction of indoor air flow in a model room. Energy and buildings 2003; 35: 515-526. http://dx.doi.org/10.1016/S0378-7788(02)00163-9

Moraga NO and Lopez SE. Numerical simulation of threedimensional mixed convection in an air-cooled cavity. Numerical Heat Transfer Part A: Applications 2004; 45: 811-824. http://dx.doi.org/10.1080/10407780490250409

Haslavsky V, Tanny J and Teitel M. Interaction between the mixing and displacement modes in a naturally ventilated enclosure. Building and Environment 2006; 41: 1755-1761. http://dx.doi.org/10.1016/j.buildenv.2005.07.013

Rahman M, Alim M, Mamun M, Chowdhury MK and Islam AKMS. Numerical study of opposing mixed convection in a vented enclosure. ARPN J Eng and Appl Sciences 2007; 2: 25-36.

Daghigh R, Adam N, Sahari B, Sopian K and Alghoul M. Influences of air exchange effectiveness and its rate on thermal comfort: Naturally ventilated office. Journal of Building Physics 2008; 32: 1744-2591. http://dx.doi.org/10.1177/1744259108097333

Raji A, Hasnaoui M and Bahlaoui A. Numerical study of natural convection dominated heat transfer in a ventilated cavity case of force flow playing simultaneous assisting and opposing roles. International Journal of Heat and Fluid Flow 2008; 29: 1174-1181. http://dx.doi.org/10.1016/j.ijheatfluidflow.2008.01.010

Saha S, Mamun A, Hossain Z and Islam S. Mixed convection in an enclosure with different inlet and exit configurations. Journal of Applied Fluid Mechanics 2008; 1: 78-93.

Tanny J, Haslavsky V and Teitel M. Airflow and heat flux through the vertical opening of buoyancy-induced naturally ventilated enclosures. Energy and Buildings 2008; 40: 637-646. http://dx.doi.org/10.1016/j.enbuild.2007.04.020

Lariani A, Nesreddine H and Galanis N. Numerical and experimental study of 3D turbulent airflow in a full scale heated ventilated room. Engineering Applications of Computational Fluid Mechanics 2009; 3: 1-14. http://dx.doi.org/10.1080/19942060.2009.11015250

Xamán J, Tun J, Álvarez G, et al. Optimum ventilation based on the overall ventilation effectiveness for temperature distribution in ventilated cavities. International Journal of Thermal Sciences 2009; 48: 1574-1585. http://dx.doi.org/10.1016/j.ijthermalsci.2008.12.008

Rodriguez NA and Hinojosa JF. Numerical study of airflow and heat transfer in an air-cooled room with different inlet positions. Journal of Building Physics 2014; 37: 246-268. http://dx.doi.org/10.1177/1744259112462106

Papanicolaou E and Jaluria Y. Mixed convection from an isolated heat source in a rectangular enclosure. Numerical Heat Transfer Part A 1990; 18: 427-461. http://dx.doi.org/10.1080/10407789008944802

Papanicolaou E and Jaluria Y. Mixed convection from localized heat source in a cavity with conducting walls. Numerical Heat Transfer Part A 1993; 23: 463-484. http://dx.doi.org/10.1080/10407789308913683

Hsu T and Wang S. Mixed convection in a rectangular enclosure with discrete heat sources. Numerical Heat Transfer Part A 2000; 38: 627-652. http://dx.doi.org/10.1080/104077800750021170

Radhakrishnan T, Verma A, Balaji C, et al. An experimental and numerical investigation of mixed convection from a heat generating element in a ventilated cavity. Experimental Thermal and Fluid Science 2007; 32: 502-520. http://dx.doi.org/10.1016/j.expthermflusci.2007.06.001

Ghasemi B and Aminossadati SM. Numerical simulation of mixed convection in a rectangular enclosure with different numbers and arrangements of discrete heat sources. The Arabian Journal for Science and Engineering 2008; 33: 189-207.

Bilgen E and Muftuoglu A. Cooling strategy by mixed convection of a discrete heater at its optimum position in a square cavity with ventilation ports. Int. Comm. in Heat and Mass Transfer 2008; 35: 545-550. http://dx.doi.org/10.1016/j.icheatmasstransfer.2008.01.001

Villase-or-Mora C, Sanchez-Marin FJ and Calixto-Carrera S. An indirect skin emissivity measurement in the infrared thermal range through reflection of a CO2 laser beam. Revista Mexicana de Fisica 2009; 55: 387-392.

Ince N and Launder B. On the computation of buoyancy driven turbulent flows in rectangular enclosures. International Journal of Heat and Fluid Flow 1989; 10: 110-117. http://dx.doi.org/10.1016/0142-727X(89)90003-9

Nielsen P. Specification of a two dimensional test case, Energy Conservation in Buildings and Community System. Annex 20 (1990).

Awbi H. Ventilation of buildings. E and FN Spon (2003).

Patankar S. Numerical Heat Transfer and Fluid Flow. Hemisphere Publishing, Washington (1980).

ASHRAE Standard 55. Thermal environment conditions for human occupancy (2004).

Downloads

Published

2016-07-13

How to Cite

1.
Z. C. Briceño, J. F. Hinojosa. Numerical Study of Heat Transfer and Comfort Conditions in an Air-Cooled Ventilated Room with a Human Heat Source. J. Adv. Therm. Sci. Res. [Internet]. 2016Jul.13 [cited 2021Sep.16];3(1):1-11. Available from: https://www.avantipublishers.com/jms/index.php/jatsr/article/view/853

Issue

Section

Articles