Design and Performance Characteristics of a Hybrid Photovoltaic-Thermal Regeneration System under Indoor and Outdoor Solar Radiation Conditions of Thunder Bay, Ontario
DOI:
https://doi.org/10.15377/2409-5818.2022.09.6Keywords:
Solar energy, Thunder bay, Curved PV system, Reflected light losses, Green and clean energy, Solar radiation conditions, Solar photovoltaic simulations, Hybrid renewable energy systemAbstract
Numerous energy sources continuously emit large amounts of waste energy into the earth's atmosphere. Significant losses, nearly 85% of the incident light on a PV panel, are either reflected from the PV surface, accounting for up to 20%, or dissipated as heat. In this work, a novel lab-scale hybrid photovoltaic-thermal regeneration (HPVT-R) system is designed, constructed, and tested to restore some of the reflection losses in the PV system. The new HPVT-R system design permits the PV and thermal co-systems to perform autonomously while revitalizing some of the reflection losses by hybridization. Thorough testing of the HPVT-R system was performed under lab-scale indoor simulated light and outdoor solar radiation conditions in Thunder Bay, Ontario. The HPVT-R system regenerated approximately 14 % of the reflected light in these tests, transforming it into electrical power and heat. Under the solar-simulated lights, the indoor test setup regenerated around 17 mW of electric power from the reflected light accounting for slightly less than 1% of more electric power per unit PV surface area. However, the outdoor solar radiation tests rejuvenated nearly 137 mW of electric power, accounting for approximately 3% more electric power per unit PV surface area, with a conversion efficiency of nearly 7%. Regarding heat energy, the HPVT-R system regenerated approximately 34% more in indoor and outdoor performances entirely from the reflected light. This research investigates the performance aspects of the HPVT-R system operated under different working conditions.
References
IEA US. International energy outlook 2017 overview. US Energy Information Administration; IEO2017.
Natural Resources Canada. Canada – a global leader in renewable energy, enhancing collaboration on renewable energy technologies. Energy and Mines Ministers’ Conference; Yellowknife, Northwest Territories: August 2013, p. 1-12.
Ismail B, Ahmed W. Thermoelectric power generation using waste-heat energy as an alternative green technology. Recent Pat Electr Eng. 2009; 2: 27-39. https://doi.org/10.2174/1874476110902010027 DOI: https://doi.org/10.2174/1874476110902010027
Ismail BI. Automotive exhaust gas waste-heat recovery for green electrical power generation using thermoelectric technology. Recent Pat Electr Electron Eng. 2012; 5: 185-97. https://doi.org/10.2174/2213111611205030185 DOI: https://doi.org/10.2174/2213111611205030185
Bryant SL, Borghi GP, Bartosek M, Lockhart TP. Experimental investigation on the injectivity of phenol-formaldehyde/polymer gels. SPE J. 1998; 3: 373-81. https://doi.org/10.2118/52980-PA DOI: https://doi.org/10.2118/52980-PA
Ismail BI, Hazrat AJ. Experimental characteristics of green power generation using a stirling engine powered by waste heat energy in exhaust gases produced from a four-stroke SI engine. 5th International Conference & Exhibition on Clean Energy (ICCE2016), Montreal Quebec, Canada: 22-24 August 2016, p. 125-35.
Riffat SB, Cuce E. A review on hybrid photovoltaic/thermal collectors and systems. Int J Low-Carbon Technol. 2011; 6: 212-41. https://doi.org/10.1093/ijlct/ctr016 DOI: https://doi.org/10.1093/ijlct/ctr016
Tonui JK, Tripanagnostopoulos Y. Improved PV/T solar collectors with heat extraction by forced or natural air circulation. Renew Energy. 2007; 32: 623-37. https://doi.org/10.1016/j.renene.2006.03.006 DOI: https://doi.org/10.1016/j.renene.2006.03.006
Basel I. Ismail, Justin P. Bujold. Performance characteristics of a simulated hybrid solar-photovoltaic-thermoelectric system for renewable and direct power generation applications. J Solar Energy Res Updates. 2021; 2: 31-9. https://doi.org/10.15377/2410-2199.2015.02.02.3 DOI: https://doi.org/10.15377/2410-2199.2015.02.02.3
Ismail BI, Bujold JP. Experimental investigation of a hybrid solar PV-thermoelectric power generation system under indoor solar simulator & outdoor climate conditions of Thunder Bay, Ontario, Canada. Int J Green Technol. 2020: 6: 38-50.
Yamada T, Nakamura H, Sugiura T, Sakuta K, Kurokawa K. Reflection loss analysis by optical modeling of PV module. Sol Energy Mater Sol Cells. 2001; 67: 405-13. https://doi.org/10.1016/S0927-0248(00)00309-3 DOI: https://doi.org/10.1016/S0927-0248(00)00309-3
Kalogirou SA. Solar energy engineering: processes and Systems. 2nd ed. London: Academic Press; 2014.
Ju X, Xu C, Liao Z, Du X, Wei G, Wang Z, et al. A review of concentrated photovoltaic-thermal (CPVT) hybrid solar systems with waste heat recovery (WHR). Sci Bull. 2017; 62: 1388-426. https://doi.org/10.1016/j.scib.2017.10.002 DOI: https://doi.org/10.1016/j.scib.2017.10.002
Michael JJ, Iniyan S, Goic R. Flat plate solar photovoltaic–thermal (PV/T) systems: A reference guide. Renew Sustain Energy Rev. 2015; 51: 62-88. https://doi.org/10.1016/j.rser.2015.06.022 DOI: https://doi.org/10.1016/j.rser.2015.06.022
Kim JH, Kim JT. Comparison of electrical and thermal performances of glazed and unglazed PVT collectors. Int J Photoenergy. 2012; 2012: 1-7. https://doi.org/10.1155/2012/957847 DOI: https://doi.org/10.1155/2012/957847
Li M, Ji X, Li GL, Yang ZM, Wei SX, Wang LL. Performance investigation and optimization of the Trough Concentrating Photovoltaic/Thermal system. Sol Energy. 2011; 85: 1028-34. https://doi.org/10.1016/j.solener.2011.02.020 DOI: https://doi.org/10.1016/j.solener.2011.02.020
Manokar AM, Winston DP, Vimala M. Performance analysis of parabolic trough concentrating photovoltaic thermal system. Procedia Technol. 2016; 24: 485-91. https://doi.org/10.1016/j.protcy.2016.05.083 DOI: https://doi.org/10.1016/j.protcy.2016.05.083
Wang Z, Wei J, Zhang G, Xie H, Khalid M. Design and performance study on a large-scale hybrid CPV/T system based on unsteady-state thermal model. Sol Energy. 2019; 177: 427-39. https://doi.org/10.1016/j.solener.2018.11.043 DOI: https://doi.org/10.1016/j.solener.2018.11.043
Shahsavar A. Experimental evaluation of energy and exergy performance of a nanofluid-based photovoltaic/thermal system equipped with a sheet-and-sinusoidal serpentine tube collector. J Cleaner Prod. 2021; 287: 1-23. https://doi.org/10.1016/j.jclepro.2020.125064 DOI: https://doi.org/10.1016/j.jclepro.2020.125064
Das D, Kalita P, Roy O. Flat plate hybrid photovoltaic- thermal (PV/T) system: A review on design and development. Renew Sustain Energy Rev. 2018; 84: 111-30. https://doi.org/10.1016/j.rser.2018.01.002 DOI: https://doi.org/10.1016/j.rser.2018.01.002
Rejeb O, Gaillard L, Giroux-Julien S, Ghenai C, Jemni A, Bettayeb M, et al. Novel solar PV/Thermal collector design for the enhancement of thermal and electrical performances. Renew Energy. 2020; 146: 610-27. https://doi.org/10.1016/j.renene.2019.06.158 DOI: https://doi.org/10.1016/j.renene.2019.06.158
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Basel I. Ismail, Amos Jose
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
All the published articles are licensed under the terms of the Creative Commons Attribution Non-Commercial License (CC BY-NC 4.0) which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.
