AbstractOne billion-ton super large oil field of Mahu is the largest oil and gas exploration achievement in China in recent years and has become the most realistic replacement area for increasing reserves and production in China as the world's largest conglomerate oil field till now. According to the complex reservoir-forming conditions in Mahu Sag, poor reservoir property, strong heterogeneity, and large sand body span, hydraulic fracturing in this area was facing serious challenges in fracture initiation and proppant placement. It has deepened the concept of volume fracturing technology and improved the effect of reconstruction; advanced chemicals to optimize replacement and reduce costs; tackled key perforation bridge plug with production technology to improve the level of operation according to 5 year’s stimulation experiences. The volume fracturing series technologies have been widely applied in 11 blocks and 97 wells in Mahu, including most of the exploration, evaluation, and development areas. For the tight conglomerate oil reservoir of Mahu, the fracturing and producing effects accompanied by economic development have been realized and effectively promoted, thus the average cumulative production increased by 37.5% per year.
Lv, Y.J., G. Zhang, Z.F. Zhao, Y. Wang. 2018. An experimental investigation on influence of Hydraulic Pulse on Hydraulic Fracture. In American Rock Mechanics Association, Seattle, 17-20 June 2018.
Song Z.Q., L.L. Yang, Y. Cheng, N. Wang, J. Ding. 2007. Comprehensive evaluation of heterogeneity conglomerate reservoirs—Taking conglomerate reservoirs in Qizhong and Qidong area of Karamay oilfield as an example. J. Petroleum Geology & Experiment. (04):415-419.
Zan L., S.H. Wang, Z.H. Zhang, et al. 2011. Research status of sandy conglomerates reservoir. J. Journal of Yangtze University: Natural Science. 8(3): 63–66.
Fei Z, et al., Experimental Investigation on Mechanical Properties of Glutenite From Mahu Sag, Junggar Basin, China, The 5th ISRM Young Scholars' Symposium on Rock Mechanics and ISRM, December 1-4, 2019, Okinawa, Japan, ISBN 978-4-907430-04-7 N.
Lei D.W., J.H. Qu, Z.Y. An, X.C. You, T. Wu. 2015. Hydrocarbon accumulation conditions and enrichment regularity of low-permeability glutenite reservoirs of Baikouquan Formation in Mahu Sag, Junggar Basin. J. Xinjiang Petroleum Geology. 36(06): 642-647. (in Chinese).
Wang H. 2011. The study of hydraulic fracture propagation influenced by gravel in the sand-gravel reservoir. D. The China University of Petroleum. (in Chinese).
Zhang, P., Zhang, J., Xie, J., Lee, Y., Zhang, M., Ding, F., Yuan, Y., Li, J., Zhang, X., 2014, Deposition and diagenesis of steep-slope glutenite reservoirs: Shengtuo Field, eastern China, Energy Explor. Exploit, 32, 483–501. https://doi.org/10.1260/0144-5918.104.22.1683
Shimizu, H., Murata, S., Ishida, T., 2011, The distinct element analysis for hydraulic fracturing in hard rock considering fluid viscosity and particle size distribution, Int. J. Rock Mech. Min. Sci., 48, 712–727. https://doi.org/10.1016/j.ijrmms.2011.04.013
Luo P. 2014. Study on the mechanism of fracturing fluid filtration and hydraulic fracture propagation in the conglomerate reservoir. D. Southwest Petroleum University.
Ju Y., Y.M. Yang, J.L. Chen, et al. 2016. 3D reconstruction of low-permeability heterogeneous glutenites and numerical simulation of hydraulic fracturing behavior. J. Chin Sci Bull. 61: 82-93. https://doi.org/10.1360/N972015-00292
Liu P. 2017. Experimental and numerical simulating studies on hydrofracturing mechanism of glutenite. D. China University of Mining and Technology-Beijing.
Ma X.F., Y.S. Zou, N. Li, M. Chen, Y.N. Zhang, Z.Z. Liu. 2017. Experimental study on the mechanism of hydraulic fracture growth in a glutenite reservoir. J. Journal of Structural Geology. 97, 37-47. https://doi.org/10.1016/j.jsg.2017.02.012
Pan Y.B., Z.G. Liu. 2019. Experimental Study on Crack Propagation Characteristics of Hydraulic Fracturing in Glutenite Reservoirs. J. Geotechnical and Geological Engineering. 37(5). https://doi.org/10.1007/s10706-018-0639-z
Zhang Z.L., Y. Chen, Q.S. Zhang, A.S. Li, L.Y. Zhang, M. Li, B. Huang. 2019. Numerical simulation on propagation mode of hydraulic fracture approaching gravels in tight glutenite. J. Petroleum Geology and Recovery Efficiency. 26(04): 132- 138.
Chen M., F. Pang, and Y. Jin. 2000. Experiments and analysis on hydraulic fracturing by a large-size triaxial simulator. J. Chin J Rock Mech Eng. 19(Supp.): 868－872.
Ju, Y., Liu, P., Chen, J., Yang, Y., Ranjith, P.G., 2016, CDEMbased analysis of the 3D initiation and propagation of hydrofracturing cracks in heterogeneous glutenites, J. Nat. Gas Sci. Eng., 35, 614–623. https://doi.org/10.1016/j.jngse.2016.09.011
C. L. Feng, X. Q. Wu, D. X. Ding et al., 2009, Investigation on fatigue characteristics of white sandstone under cyclic loading, Chinese Journal of Rock Mechanics and Engineering, vol. 28, no. 1, pp. 2749–2754.
F. Kittitep and P. Decho, 2010, Effects of cyclic loading on mechanical properties of Maha Sarakham salt,” Engineering Geology, vol. 112, no. 1–4, pp. 43–52. https://doi.org/10.1016/j.enggeo.2010.01.002
J. Q. Xiao, D. X. Ding, G. Xu, and F. Jiang, 2008, Waveform effect on quasi-dynamic loading condition and the mechanical properties of brittle materials, International Journal of Rock Mechanics and Mining Sciences, vol. 45, no. 4, pp. 621–626. https://doi.org/10.1016/j.ijrmms.2007.07.025
J. Y. Fan, J. Chen, and D. Y. Jiang, 2016, Fatigue properties of rock salt subjected to interval cyclic pressure, International Journal of Fatigue, vol. 90, pp. 109–115. https://doi.org/10.1016/j.ijfatigue.2016.04.021
M. N. Bagde and V. Petros, 2009, Fatigue and dynamic energy behaviour of rock subjected to cyclicalloading, International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 1, pp. 200–209. https://doi.org/10.1016/j.ijrmms.2008.05.002
X. R. Ge and Y. F. Lu, 1992, Discussion about coal’s fatigue failure and irreversible problem under cyclic loads, Chinese Journal of Rock Mechanics and Engineering, vol. 14, no. 3, pp. 56–60.
W.B. Zhang, et al, 2017, Individual Drilling Bit Design and Optimization in Mahu Area, MATEC Web of Conferences, 128, 05017. https://doi.org/10.1051/matecconf/201712805017
Pope C, Peters B, Benton T, et al. Haynesville shale-one operator’s approach to well completions in this evolving play. SPE 125079, 2009. https://doi.org/10.2118/125079-MS
Z. Jing, et al. Application of geology-engineering integration in development of tight oil in Xinjiang oilfield[J]. China Petroleum Exploration, 2017, 22(1): 12-20.
Fonseca E, Farinas M J. Hydraulic fracturing simulation case study and post frac analysis in the Haynesville shale. SPE 163847, 2013. https://doi.org/10.2118/163847-MS
M. J. Mayerhofer, E.P. Lolon, J.E. Youngblood, et al. Integration of microseismic fracture mapping results with numerical fracture network production modeling in the barnett shale[R]. SPE 102103, 2006. https://doi.org/10.2118/102103-MS
M. J. Mayerhofer, E.P. Lolon, N. R. Warpinski, et al. What is Stimulated Reservoir Volume (srv) [R]. SPE 119890, 2008. https://doi.org/10.2118/119890-MS
Y. Xiao and J. C. Guo. Optimization of Fracturing Parameters for Low Permeability and Heterogeneous Reservoir Oil Well [J]. Science Technology and Engineering 33(12), 2012:9019– 9022.
C. C. Xu, C. H. Chen, B. Wang, et al. Fracture Parameter Optimization of Network Fracturing for Horizontal Well in Low Permeability and Tight oil Reservoir [J]. Fault-Block Oil & Gas Field 21(6), 2014:823–827.
Mark D. Zoback, Arjun Kohli, et al. The Importance of Slow Slip on Faults during Hydraulic Fracturing Stimulation of Shale Gas Reservoirs[R]. SPE 15476, 2012. https://doi.org/10.2118/155476-MS
X. D. Wang, M. Q. Hao and Y. X. Han. The Meaning and Application of Threshold Pressure Gradient [J]. Acta Petrolei Sinica 34(1), 2015: 188–191.
F. Wu, L. J. Sun, G. A. Qiao, et al. A Practical Method of Production Decline Analysis of Gas Field [J]. Natural Gas Industry 1, 2001: 82–84.
W. Y. Zhu, W. Tian, H. Y Zhu, et al. Study on Experiment of Threshold Pressure Gradient for Tight Sandstone [J]. Science Technology and Engineering 15(3), 2015: 79–82.
J. Wang, H.Q. Liu, R. J Liu and J. Xu. Numerical Simulation for Low-Permeability and Extra- low permeability Reservoir with Considering Starting Pressure and Stress Sensitivity Effects [J].Rock Mechanics and Engineering 7(32), 2013: 3317–3327
K.Yan, et.al, Influencing factors and quantitative evaluation for pore structure of tight glutenite reservoir:a case of the Triassic Baikouquan Formation in Ma131 well field, Mahu sag[J]. Lithologic Reservoirs, 2017, 29(4): 91-100.
H. Du, et al. Development and deepening of profitable development of tight glutenite oil reservoirs in Xinjiang oilfield:application of geology-engineering integration in Mahu area and its enlightenment[J]. China Petroleum Exploration, 2018, 23(2): 15-26.
Chengye, Y., and Z. Zhicai, 2011, Estimating near-surface Q values using dual-well and micro-well logging data: Oil Geophysical Prospecting, 46,89–92.
Dasgupta, R., and D. A. Clark, 1998, Estimation of Q from surface seismic reflection data: Geophysics, 63, 2120–2128. https://doi.org/10.1190/1.1444505
Jiangyun, P., C. Shumin, and L. Zhenkuan, 2001, Nearsurface Q-value calculation and amplitude compensation: Progress in Geophysics, 16, 18–22.
Zhu, F., F. Yinglu, Z. Shaofeng, M. Wei, and C. Mingke, 2013, Study on surface absorption attenuation and compensation methods in the basin of northern Suzhou: Journal of Journal of Petroleum and Natural Gas, 11, 51–55.
Qin J.H, et al., Sweet spot classifi cation evaluation of tight conglomerate reservoir in Mahu sag and its engineering application[J], China Petroleum Exploration, 2020, 25(2): 113-114.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2021 International Journal of Petroleum Technology