Influence of Stiffeners and Buckling Arrestors on the Behaviour of Offshore Pipelines under Bending
Authors
Federico GuarracinoFiles
Key Information
Journal
Published in Vol. 5 (2018) of International Journal of Petroleum Technology.
The International Journal of Petroleum Technology (IJPT) is the go-to resource for researchers, academics, and practitioners seeking to stay on the cutting edge of the rapidly evolving field of petroleum technology. This interdisciplinary, peer-reviewed platform is dedicated to publishing research and development works of the highest technical standards, with an appropriate balance of practice and theory across the broad topics of Petroleum and Oil Technology.
IJPT encourages original research articles and insightful reviews in all aspects of the field, with a particular emphasis on the following areas of interest: Production of hydrocarbons, Petroleum Exploration (Drilling, Production and Flow), Single and Multiphase Fluid Flows in Porous Media, Physical-Chemical Properties and Rheological Behaviour, Petroleum Geochemistry, Petro Physics, Petroleum Economics, Petroleum Geology, Oil Refining and Process Engineering, Synthetic Fuel Technologies, Oil Shale Technology, Drilling, and Drilling Fluids.
In addition to providing cross-learning between scientific and technological realms, IJPT also takes into account the public's concerns regarding environmental, health, and safety issues. This includes original investigations focused on the multiscale approach of the modern, sustainable green petroleum and oil technology that is set to be encountered in the factory of the future. Process intensification that requires new green technologies such as catalysts, green solvents, exchangers, reactors, and separation equipment is also covered in IJPT.
About the JournalAbstract
References
Palmer AC and Martin JH. Buckle propagation in submarine pipelines, Nature 1975; 254: 46-48. https://doi.org/10.1038/254046a0 DOI: https://doi.org/10.1038/254046a0
Guarracino F. On the analysis of cylindrical tubes under flexure: theoretical formulations, experimental data and finite elements analysis. Thin-Walled Structures 2003; 41(2-3): 127-147. https://doi.org/10.1016/S0263-8231(02)00083-6 DOI: https://doi.org/10.1016/S0263-8231(02)00083-6
Guarracino F, Fraldi M and Giordano A. Analysis of testing methods of pipelines for limit state design. Applied Ocean Research 2008; 30(4): 297-304. https://doi.org/10.1016/j.apor.2008.12.003 DOI: https://doi.org/10.1016/j.apor.2008.12.003
Guarracino F and Walker AC and Giordano A. Effects of Boundary Conditions on Testing of Pipes and Finite Element Modelling. Int J Press Ves Piping 2009; 86(2-3): 196-206. https://doi.org/10.1016/j.ijpvp.2008.09.009 DOI: https://doi.org/10.1016/j.ijpvp.2008.09.009
Guarracino F. A Simple Formula for Complementing FE Analyses in the Estimation of the Effects of Local Conditions in Circular Cylindrical Shells. CMES – Comp Mod Eng Sci 2011; 72 (3): 167-184. https://doi.org/10.3970/cmes.2011.072.167
Guarracino F and Mallardo V. A refined analytical analysis of submerged pipelines in seabed laying, Applied Ocean Research 1999; 21(6): 281-293. https://doi.org/10.1016/S0141-1187(99)00020-6 DOI: https://doi.org/10.1016/S0141-1187(99)00020-6
Ellinas CP, Walker AC, Langfield GN and Vines MJ. A Development in the Reeling Method for Laying Subsea Pipeline, in: Proc. 1st Petroleum Tech. Australian Conf Perth Australia 1985.
Walker AC, Holt A, Guarracino F and Wilmot D. Test Procedure for Pipe and Pipeline Material, Offshore Pipeline Technology Conference, Amsterdam, Holland 2003.
Guarracino F and Walker AC. Energy Methods in Structural Mechanics, Telford, London, UK 1999. https://doi.org/10.1680/emism.27572 DOI: https://doi.org/10.1680/emism.27572
Donnell LH. Stability of Thin-Walled Tubes under Torsion, NACA Rep 1935; 479.
Timoshenko SP and Woinowsky-Kreiger S. Theory of Plates and Shells, McGraw-Hill, New York, USA, 1959.
Wolfram S. The Mathematica Book, Wolfram Media, Inc Champaign, IL, USA, 2003.