Numerical Modeling of Turbulent Flow Inside the Centrifugal Blower

Authors

  • Majid Almas

DOI:

https://doi.org/10.15377/2409-5761.2016.03.01.8

Keywords:

Centrifugal blower, turbulent flow, RANS model, angular velocity, hybrid mesh

Abstract

 In this paper, turbulent flow inside the centrifugal blower has been studied numerically. The computational simulation is conducted by employing the Reynolds Averaged Navier­Stokes (RANS) approach. The standard model with enhanced wall treatment has been implemented for modeling the turbulent flow. Effects of different angular velocities have been studied on static pressure and mass flow rate. The numerical results shows that static pressure and mass flow rate significantly increase as the angular velocity of blades increases.

References

Young-Tae Lee and Hee-Chang Lim. Performance assessment of various fan ribs inside a centrifugal blower. Energy 2016; 94: 609-622. http://dx.doi.org/10.1016/j.energy.2015.11.007

Chen Xu and Yijun Mao. Experimental investigation of metal foam for controlling centrifugal fan noise. Applied Acoustics 2016; 104:182-192. http://dx.doi.org/10.1016/j.apacoust.2015.11.014

Beena D, Baloni SA and Channiwala VK. Mayavanshi, Pressure recovery and loss coefficient variations in the two different centrifugal blower. Appl Energy 2012; 90: 335-343 http://dx.doi.org/10.1016/j.apenergy.2011.02.016

Engeda A, Strate WP and Rautenberg M. Correlation of tip clearance effects to impeller geometry and fluid dynamics. ASME 1988 International Gas Turbine and Aeroengine Congress. Paper 88-GT-92 (1988) V001T01A040. http://dx.doi.org/10.1115/88-gt-92

Cao S and Chu L. Experimental study on the matching between centrifugal impeller and volute. Chin Fluid Mach 1991; 10: 2-4.

Bayomi NN, Hafiz AA and Osman AM. Effect of inlet straighteners on centrifugal fan performance, Energy Convers Manag 2006; 18: 3307-3318. http://dx.doi.org/10.1016/j.enconman.2006.01.003

Li Chunxi, Wang Song Ling and Jia Yakui. The performance of a centrifugal fan with enlarged impeller. Energ Convers Manage 2011; 52: 2902-2910. http://dx.doi.org/10.1016/j.enconman.2011.02.026

Qi Datong, Yijun, Liu Xiaoliang and Minjian Y. Experimental study on the noise reduction of an industrial forward-curved blades centrifugal fan. Appl Acoust 2009; 70: 1041-1050. http://dx.doi.org/10.1016/j.apacoust.2009.03.002

Majidi Kitano APRIL. Numerical study of unsteady flow in a centrifugal pump. J Turbomach 2005; 127: 363-371. http://dx.doi.org/10.1115/1.1776587

Sandra VS, Rafael BT, Carlos SM and Bruno PG. Reduction of the aerodynamic total noise of a forward curved centrifugal fan by modification of the volute tongue geometry. Appl Acoust 2008; 69: 225-232. http://dx.doi.org/10.1016/j.apacoust.2006.10.009

Ghasemi E, McEligot DM, Nolan KP, Crepeau J, Tokuhiro A and Budwig RS. Entropy generation in a transitional boundary layer region under the influence of freestream turbulence using transitional RANS models and DNS. Int Commu heat Mass transfer 2013; 41: 10-16. http://dx.doi.org/10.1016/j.icheatmasstransfer.2012.11.005

Downloads

Published

2016-09-22

How to Cite

Majid Almas. (2016). Numerical Modeling of Turbulent Flow Inside the Centrifugal Blower. Journal of Advances in Applied &Amp; Computational Mathematics, 3(1), 54–57. https://doi.org/10.15377/2409-5761.2016.03.01.8

Issue

Section

Articles